We're Hiring! Click Here to Apply.
Wolff Mechanical Wolff Mechanical
Flag of United States NATE
Schedule Service Online
Spread the word and we’ll give you and your referral 10% OFF your next service! Learn More

Maximizing The Life Of Your Arizona HVAC System

Your house is the largest purchase you’ll ever make in your lifetime. And your HVAC system is the most expensive appliance inside your four walls. Therefore, it’s critical that your HVAC system get the attention it needs to continue operating properly for many, many years.

Ideally, an air conditioning system in Arizona should provide quality service for anywhere from 10 to 20 years. The difference lies in how the homeowner chooses to maintain their system.

Routine Inspection Is The Key To Optimum HVAC Health

Just as the human body requires regular check-ups to ensure optimum health, so does a home’s HVAC system. An Arizona air conditioning service can perform the inspection and routing preventive maintenance your system needs to make sure it last for years.

9 Ways An AZ Air Conditioning Contractor Can Improve Your A/C

When an Arizona air conditioning service contractor performs an inspection on your home’s HVAC system, he takes the time to check all of the integral components that are essential to proper operation and efficiency. During this inspection, the HVAC inspector will usually perform the following tasks:

1.)    Test the thermostat to ensure that it is effectively communicating with your HVAC system so that it starts, operates and shuts off properly. If you have a programmable thermostat, the contractor can also program it according to your lifestyle so your system only runs when you need it most.
2.)    Check and clean out the system’s water drain. A plugged drain can cause an overflow of condensation water will may eventually damage your floors or walls.
3.)    Check moving parts for proper lubrication and lubricate if necessary. If movable parts are grinding for lack of lubrication, it can cause your HVAC unit to run less efficiently and eventually result in frequent costly repairs.
4.)    Check all electrical connections and tighten if necessary. Loose or bad electrical connections are dangerous and can damage the sensitive components of your HVAC system.
5.)    Measure the system’s voltage to ensure all circuits are getting the right voltage. If your HVAC system isn’t receiving the proper voltage in the right components, it won’t operate the way it’s designed to and eventually the components will be ruined and need to be replaced.
6.)    Check and adjust the blower components for optimum air flow. Poor air flow can reduce your system’s efficiency by 15% or more.
7.)    Check and clean the Evaporator and Condenser coils. Dirty coils will cause your system to run longer and work harder, the results of which you will see on your monthly utility bill.
8.)    Replace the air filter. This should be done monthly by the homeowner to reduce allergens and pollutants in the home and to ensure maximum air flow.
9.)    Educate the homeowner on how to efficiently operate their HVAC unit to ensure comfort in the home and a lower utility bill.

Contact Wolff Mechanical And Schedule An HVAC Inspection Today

Schedule an inspection of your home’s HVAC system by Wolff Mechanical and make sure your system’s ready for summer. We provide our customers with outstanding service and support and have been servicing the Phoenix Valley since 1990.

Related Posts
  • New Smart HVAC Technology for 2022 Read More
  • Ceiling Fans And Your Cooling System: Why They Work Better Together Read More
  • Manual J: Does Your Technician Know It Inside Out? Read More